Carefully inspect the new product for any damage before installation.
Lacasa is not liable or shall not be responsible for any such damage or for improper installation. The installation should be done by trained technician.
Clean the sink at least once a week. When cleaning use mild soapy water and rub in the direction of the grain lines, rinse and towel dry.
Drying is important to eliminate collection of lime scale, mineral deposits and calcium stack.
Always rinse the sink after every use and wipe dry.
Avoid use of cleaners & bleachers containing harmful chemicals and acid.
Avoid prolonged contact with citric or high salt concentration food as it can lead to staining, pitting and corrosion of the sink.
Steel wool / wired brushes / abrasive sponge pads are not recommended for cleaning as it leads to scratches and rusting on the sink.
Do not use the sink drain board as a cutting or chopping board as it will leave scratches on the sink.
Do not remove the film coating on the sink before installation to avoid scratches and damage during installation. Remove the film only after installation, but before use.
Remove all traces of cement, mortar, lime, POP etc. used during installation as it can lead to surface rusting or pitting.
Carefully inspect the new product for any damage before installation.
Lacasa is not liable or shall not be responsible for any such damage or for improper installation. The installation should be done by trained technician.
Water Scaling: Due to presence of minerals and salt in water, scaling is formed on the product if it is not cleaned regularly. The products should be cleaned gently at regular intervals. Also, take extra care to clean the edges and corners of the products because these areas are more vulnerable for scale settling.
Clean the aerators from time to time for a perfect foam flow of water from the faucet. The property of water being used is very important for your plumbing installations (Pipes etc.)
Acid Fumes: When we clean the tiles or floors in the bathroom with cleaning agents which contain acids or chemicals, acid fumes are formed. Because the basic material used in the products is brass, brass being an alloy of copper reacts with these acid fumes. with the reaction, a green coloured layer is formed on the products resulting in damage to the outer finish or coating.
Scratching While Cleaning: Scratching or scrubbing occurs due to hard nature of cloth or coarse cleaning powder being used for cleaning. Use a gentle fluffy soft cloth for cleaning the surface.
Atmospheric Conditions: This condition applies mostly to salt content in the air in coastal areas, sometimes the air reacts with brass and black spots emerge on the surface of product. Therefore the product is required to be cleaned regularly.
At the time of installation of the products, cover the products with the cloth covers provided in packaging or with polythene till the time you actually start using them.
Download your free copy of “The Lacasa Sink Guide” for:
• Complete know-how on selecting the right sinks
• Answers all your doubts and questions regarding Sinks
• A gallery of visually inspiring ideas